BKDYF - TRIPLE EXPANDING POLYURETHANE FOAM 36 OZ.

  • MSDS: BKDYF
  • Manufacturer: MACKLANBURG DUNCAN
  • Product Name: TRIPLE EXPANDING POLYURETHANE FOAM 36 OZ.
  • National Stock Number: 8030-00F015749
Product Identification

Product ID:TRIPLE EXPANDING POLYURETHANE FOAM 36 OZ.
MSDS Date:07/25/1989
FSC:8030
NIIN:00F015749
MSDS Number: BKDYF

Responsible Party
MACKLANBURG-DUNCAN
4041 NORTH SANTA FE
OKLAHOMA CITY, OK 73118

Emergency Phone: (405) 528-4411

Info Phone: (405) 528-4411

Cage: 82464

Contractor
MACKLANBURG-DUNCAN
OKLAHOMA CITY, OK 73118-0188 US

Telephone: 800-654-8454 / 405-528-4411

Cage: 82464

Ingredients

HIGHER OLIGOMERS OF MDI, POLYMETHYLENE POLYPHENYLENE

CAS: 9016-87-9

RTECS: TR0350000


DICHLORODIFLUOROMETHANE (SARA III)

CAS: 75-71-8

RTECS: PA8200000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TRICHLOROFLUOROMETHANE (CFC-11) (SARA III)

CAS: 75-69-4

RTECS: PB6125000

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)

CAS: 101-68-8

RTECS: NQ9350000

OSHA PEL C, 0.02 PPM

ACGIH TLV: 0.005 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: BREATHLESSNESS, CHEST
DISCOMFORT, MUCOUS MEMBRANE IRRITATION, HEADACHE, COUGHING,
ASTHMA-LIKE ALLERGIC REACTION, REDUCED PULMONARY FUNCTION. SKIN:
IRRITATION & DISCOLORATION. EYE: IRRITATI ON, CORNEAL & PHYSICAL
DAMAGE. INGESTION: IRRITATION, CORROSIVE ACTION IN MOUTH &
DIGESTIVE TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: BRONCHITIS, BRONCHIAL SPASM &
PULMONARY EDEMA. SKIN: REDDENING, SWELLING, BLISTERING,
SENSITIZATION, DERMATITIS & ADHERENCE. EYE: IRRITATION, CORNEAL &
PHYSICAL DAMAGE. INGESTION: IRRITATI ON, CORROSIVE ACTION IN MOUTH
& DIGESTIVE TRACT.
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY PROBLEMS & SKIN
IRRITATIONS.

First Aid

First Aid:INHALATION: TREAT SYMPTOMATICALLY W/VASO-DILATORS & OXYGEN.
SKIN: WASH W/ABRASIVE SOAP & WATER, ACETONE OR ALCOHOL. EYES: FLUSH
W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE VOMITING. OBTAIN
MEDICAL AT TENTION IN ALL CASES.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, & HIGH EXPANSION CHEMICAL
FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IN
POSITIVE PRESSURE MODE & FULL PROTECTIVE GEAR. USE WATER TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:SEALED CONTAINERS CONTAINING FREON MAY
EXPAND UNDER PRESSURE & EXPLODE. A REACTION BETWEEN WATER &
POLYMERIC ISOCYANATE AT ELEVATED TEMPERATURES CAN BE VIOLENT.

Accidental Release

Spill Release Procedures:COVER W/ABSORBENT MATERIAL SUCH AS SAWDUST.
PLACE IN OPEN TOP CONTAINER OR PLASTIC SHEET. AFTER CURING,
MATERIAL CAN ONLY BE REMOVED MECHANICALLY.

Handling

Handling and Storage Precautions:DON'T STORE NEAR HEAT
SOURCE/SPARK/FLAME/IN CARS/CAR TRUNK/DIRECT SUNLIGHT/FREEZING.
STORE BETWEEN 40-120F. DON'T INGEST. USE IN WELL VENTILATED AREA.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT W/SKIN.
USE ENTIRE CAN WITHIN 30 DAYS OF INITIAL APPLICATION. FOR LONGER
SHELF LIFE AVOID STORAGE >85F. PRODUCT FOAMS UPON RELEASE FROM
PRESSURIZED CONTAIN ER & CURES SOLID WITHIN 30 MINS.

Exposure Controls

Respiratory Protection:WEAR NIOSH-APPROVED CARTRIDGE RESPIRATOR.
Ventilation:PROVIDE ADEQUATE MECHANICAL EXHAUST TO KEEP Protective Gloves:CHEMICAL RESISTANT RUBBER OR PLASTIC
Eye Protection:SAFETY GOGGLES OR FACE SHIELD
Work Hygienic Practices:WASH HANDS AFTER USE. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

Vapor Pres:70
Vapor Density:8.5
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT BROWN, VISCOUS, POROUS LIQUID; FOAMS UPON
RELEASE FROM CONTAINER
Percent Volatiles by Volume:<2%

Stability

Stability Indicator/Materials to Avoid:YES
WATER, STRONG CAUSTICS, AMINES, ALCOHOLS, & SOME METAL COMPOUNDS.
Stability Condition to Avoid:WATER CONTAMINATION, FREEZING, TEMPS
>120F, HEAT SOURCES, SPARKS, FLAMES, & SUNLIGHT.
Hazardous Decomposition Products:CO2/CO/BENZENE/TOLUENE/INORGANIC
ACID/CARBONYL HALIDE/MDI/NITROGEN OXIDES/HYDROGEN
CYANIDE/ACETALDEHYDE/ACETONE
Conditions to Avoid Polymerization:MOISTURE, TEMPS >120F & WATER
CONTAMINATION .

Disposal

Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE CAN, SINCE CAN IS
PRESSURIZED. CAREFULLY VENT CAN & DISPENSE PRODUCT INTO A SUITABLE
WASTE CONTAINER & ALLOW TO CURE. DISPOSE OF IN A SANITARY LANDFILL
IN ACCORDANCE W/LOC AL/STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.